Product Description
AUDISON - Bit Ten D
Bit Ten D is a multi-function digital processor conceived and built to process digital and analogue signal both on the input and on output to the amplifier (featuring AD Link connection) and create top-performance system with any source typology.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten D processes the signal with extreme accuracy and wide configurability thanks to a software especially designed for car acoustic peculiarities.
Bit Ten D features an optical digital input, minimizing interference and degradations of the signal found in traditional analog interconnects, also by-passing the A/D conversion phases of analog signals.
Thanks to the AD Link connection, the available outputs become 8 in total, all in digital format; they can also be used simultaneously with the analog ones (for a maximum of 8 outputs total).
The AC Link is completely dedicated to the “remote control” of the system. The system is comprised of one connector for the provided DRC and one for the amplifiers present in the system. The DRC is supplied with the bit Ten D product.
| Power Supply | |
| Power supply voltage | 11 ÷ 15 VDC |
| Idling current | 0.4 A |
| Switched off without DRC | 2.5 mA |
| Switched off with DRC | 4 mA |
| Remote IN voltage | 7 ÷ 15 VDC (1.3 mA) |
| RemoteOUT voltage | 12 VDC (130 mA) |
| Distortion - THD@1 kHz, 1 V RMS Output | 0.005% |
| Bandwidth | 10 ÷ 22 kHz |
| S/N Ratio @ A weighted | |
| Digital Input | 105 dBA |
| Master Input | 95 dBA |
| AUX Input | 96 dBA |
| Channel Separation (@1 kHz) | 85 dB |
| Input sensitivity (Speaker) | 0.3 ÷ 5 V RMS |
| Input sensitivity (AUX In) | 0.6 ÷ 5 V RMS |
| Input sensitivity (Phone) | 2 ÷ 15 V RMS |
| Input impedance (Speaker) | 2.2 kΩ |
| Input impedance (AUX In) | 15 kΩ |
| Input impedance (Phone) | 2.2 kΩ |
| Max Output Levels | 4 V RMS |
| Inputs Stage | |
| High Level (Speakers) | FL - FR - RL - RR, PHONE IN |
| LowLevel (Pre) | AUX In |
| Digital Optical S/PDIF Max 96 kHz / 24bit | Optical In |
| Outputs Stage | |
| Low Level Pre (Default) | FRPNT L/R, REAR L/R, SUB |
| CH 1 - CH 8 S/PDIF | |
| Connection | |
| From/To Personal Computer | 1xUSB/B(1.1/2.0) |
| To Audison Electronics | |
| Crossover NN.5 (one each output channel) | |
| Filter | FULL / High Pass / Low Pass / Band Pass |
| Linkwitz | 12 / 24 dB |
| Butterworth | 6 / 12 / 18 / 24 dB |
| Crossover Frequency | 68 Step @ 20 - 20KHz |
| Phase Control | 0 - 180 Degrees |
| Equalizer | |
| On Hi-Levels input (Speaker In) | Automatic De-Equalization |
| On Outputs | ± 12 dB |
| Time Alignment | |
| Distance | 0 ÷ 510 cm / 0 - 200.8 inch |
| Deley | 0 - 15 ms |
| Step | 0.08 ms, 2.8 cm / 1.1 inch |
| Fine set | 0.02 ms, 0.7 cm / 0.27 inch |
| Size | |
| WxHxD (mm) | 191 x 34 x 131 |
| Weight (kg) | 1.322 |
DRC–Digital Remote Control INCLUDEDDRC is the digital interface between the bit processors and the user.
DRC mounted in the vehicle dashboard with bit Ten D processor, provides:
- ability to select between main, aux and optical inputs
- control of master volume, subwoofer volume, balance and fader
- ability to choose between 2 user-defined memory presets for equalizer, crossover and time alignment settings.
- control of the Audison Thesis amplifiers’ system when these are installed in the same system.
ECK DRCDRC cable extension kit, for installations on especially long vehicles.
OP 1.5 • TOSLINK Optical Cable 1,5m / 59,05”Optical cable ending with Toslink connectors for S/PDIF digital audio signals.
Cable length 1,5 m/59,05”
OP 4.5 • TOSLINK Optical Cable 4,5m / 177,16”Optical cable ending with Toslink connectors for S/PDIF digital audio signals.
Cable length 4,5 m/177,16”
STA • F/F Socket Toslink adapterOptical adapter to extend optical cables featuring Toslink connectors.
RCA Multipole ConnectorEssential connector making link fast and effortless. It expedites connections between low-level (PRE IN) inputs of the head unit (min. 2 volts) and PRE OUT inputs of the bit Ten.
